Factsheet 7.1: Mikroplastik in Talsperren - Wie verhalten sich Plastikteilchen in Staubereichen?

janna.vakili@ecologic.eu — Thu, 06 May 2021 12:41:30 +0000

Factsheet 7.1: Microplastics around dams - How do plastic particles behave in reservoirs? janna.vakili@e… Thu, 05/06/2021 - 14:41

Titelbild

Beschreibung

Plastic is now ubiquitous not only in the sea but also in many inland waters. In certain areas, such as at barrages or in dams, the flow velocity decreases. As a result, the particles previously held in suspension by the current begin to sink to the bottom of the water and can then accumulate in the sediment.

The behavior of microplastic particles in dams and reservoirs has been intensively studied by the research team of the collaborative project MikroPlaTaS. In this first factsheet of the project, selected results on the factors influencing the sinking processes are presented.

Factsheet 7.1 is available here as a PDF download.

Attachments

Factsheet 7.1 of the BMBF Research Focus Plastics in the Environment.

Joint project

MikroPlaTas

Year

2021

Author

Authors

Antje Nieber

Friederike Gabel

Rico Leiser

Diana Michler-Kozma

Per Olaf Walter

Katrin Wendt-Potthoff

Type of Result

factsheets

Citation

Nieber, Antje; Gabel, Friederike; Leiser, Rico; Michler-Kozma, Diana, Walter, Per Olaf; Wendt-Potthoff, Katrin (2021): Microplastics around dams: How do plastic particles behave in reservoirs? Fact sheet 7.1 of the BMBF research focus „Plastics in the Environment“.

Quiz: Plastik in der Umwelt - Was wissen Sie?

Mandy — Thu, 14 Jan 2021 11:21:04 +0000

Quiz: Plastic in the Environment – What do you know? Mandy Thu, 01/14/2021 - 12:21

Titelbild

Beschreibung

When I wash a polyester fleece jacket, can microplastics get into the water? How many climate-damaging greenhouse gases are released annually due to the global production of plastics and what is chemical recycling?

Plastics are all around us and make up an essential part of our daily lives. How much do we know about this material, its variety, the associated environmental problems and possible solutions? The quiz "Plastics in the environment - What do you know?" invites you to test your knowledge around the topic of plastics in five categories. Furthermore, the category "Questions for adults & children" contains questions suited for children.

The quiz was developed within this research focus. The quiz is available on this website and is suitable for all common browsers on computers and mobile devices.

Further Links

Link zum Quiz

Year

2020

Author

Mandy Hinzmann (Content)

Janna Vakili (Content)

Lena Aebli (Design)

Prasanna Ramesh (Programming)

Authors

Type of Result

educational material

EmiStop

KALEH — Tue, 19 Dec 2017 16:41:32 +0000

EmiStop KALEH Tue, 12/19/2017 - 17:41

Identification of Industrial Plastic Emissions by Means of Innovative Detection Methods and Technology Development to Prevent the Input into the Environment via the Wastewater Pathway

This project systematically detected emissions of plastics into wastewater from relevant industries. Emissions levels were analysed along all points of the value chain (production, transport, processing, and cleaning of synthetic materials).

The goal was to select wastewater treatment technologies that optimise the reduction of emissions of plastics for the respective value chain. The project evaluated existing technologies for separating particles, investigated deposition rates, and developed approaches for technical optimisation. Optimisation also includes technological developments such as flocculants. Researchers conducted tests in both laboratory and pilot project settings – selected large scale technical wastewater treatment plants were investigated at industrial facilities.

Due to the existing analytical uncertainties, the following detection methods were used to evaluate the existing and developed technologies:

Dynamic differential calometry for qualification and quantification (concentrations)
Raman spectroscopy for qualification and quantification (particle numbers)
Correlations of the plastic concentrations to routine water chemical analyses (for a retrospective estimation of the plastic loads)
Tracer test with magnetic plastic particles (simple and reliable quantification in large dilutions) for balancing in laboratory and pilot tests

Apart from the technical aspects, the focus of this project was also on socio-economic aspects. Thus, measures to prevent economic losses and retain value were reviewed together with the associated industrial enterprises and evaluated with partners from the scientific community and other interest groups.

Main areas of work

Standardisation of sampling and sample preparation for industrial wastewater (in alignment with Plastik-Net and other joint research projects)
Quantitative and qualitative measurement of plastic concentrations in industrial wastewater using Raman spectroscopy and dynamic differential calorimetry
Extended data collection at the sampled industrial waste water treatment plants for the derivation of the plastic loads and testing of a correlation between the measurement results and routine water chemical analyses
Development of magnetic plastic particles in the micrometre range with the physical properties of relevant types of plastic
Development of a tracer test with magnetic plastic particles
Assessment of technologies for particle separation with regard to the retention of (micro-) plastic particles
Optimisation of particle separation technologies
Development of flocculants for the targeted improvement of the retention of individual types of plastics and their mixtures
Delphi surveys of industry and sector associations as well as of politics and science to identify perceived risks and obstacles as well as opportunities and the willingness to participate
Multi-criteria analysis for the development of weighted, ecological and socio-economic criteria for the sustainability assessment of the project results

Arbeitspakete

Work packages

WP 1 Development of analytical methods for plastic particles

Contact persons
Prof. Dr. Jutta Kerpen, RheinMain University, Institute for Environmental and Process Engineering, Department of Wastewater Treatment, Am Brückweg 26, 65428 Rüsselsheim, e-mail: jutta.kerpen@hs-rm.de

Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Prof. Dr.-Ing. Markus Engelhart, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Technology, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: m.engelhart@iwar.tudarmstadt.de

Project partner
EnviroChemie

Short description
A routinely applicable sampling and sample preparation procedure were developed in order to create a uniform and comparable database for industrial wastewater. For the subsequent qualification and quantification of microplastics in (industrial) wastewater samples, the methods of dynamic differential calorimetry and Raman spectroscopy were adapted to industrial wastewater. The respective analysis results were compared with standardised routine measurements and operational self-analysis to determine correlations.

WP 2 Tracer test

Contact persons
Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Dr. Kyriakos Eslahian, BS-Partikel GmbH, Nestléstr. 41, 55120 Mainz, e-mail: eslahian@bs-partikel.de

Short description
In order to balance individual process technologies for plastic particle retention in real water matrices, a method for the quantification of magnetic plastic particles by means of magnetic susceptibility scales was established. For this purpose, particles in the size range from 1 μm to 300 μm were synthesised with the greatest possible magnetic susceptibility, which imitate the morphologies and chemical properties of environmental plastic particles.

Furthermore, a continuous method for the production of these particles was established in order to ensure the best possible reproducibility and scalability for subsequent applications.

WP 3 Identification of industrial entry points

Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Project partner
EnviroChemie, inter 3

Short description
The entry points of microplastics from industrial wastewater into surface waters were determined by uniform characterisation and quantification of the plastic emissions of individual industrial plants. The evaluation of plastic emissions on the basis of mass flows, variations and production information with key figure system and balance tools, hotspots and temporal variations of the particle input were identified.

WP 4 Balancing of technical systems

Contact persons

Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner

TU-AW, inter3, HSRM

Short description
In laboratory and pilot tests, various process techniques (filtration in various filter units such as membrane plants, double-layer filters, cloth filters; flocculation in combination with filtration, flotation or sedimentation) were evaluated with regard to plastic particle removal. For this purpose, the tracer particles developed in WP 2 were used, which enable the use of synthetic and real industrial waste water. Furthermore, the existing industrial process technology was evaluated at different industrial sites and optimised with regard to the separation of plastic particles.

WP 5 Optimisation of plastic retention

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner
TU-AW

Short description
Based on the results of WP 4, the pilot plants were adapted by specific design changes (e.g. flow control, sludge removal, conveyor technology) and the success of these optimisations was evaluated in further balancing experiments. For the industries considered, in addition to constructive optimisation of process engineering, production-integrated measures to reduce plastic emissions were derived. The production information collected in WP 3 served as the basis for this.

WP 6 Development of flocculants for plastics sorts

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner
TU-AT, TU-AW

Short description
In experiments with beakers, individual polymers for the targeted flocculation of particles of different types of plastic in the size range from 10 to 300 μm were tested. The results were then used to test specific blends of polymers to produce the most stable flakes of particles of individual plastic types. With these results, the tests and developments were extended to mixtures of different types of plastics.

The laboratory test results were then supplemented by pilot tests using tracer particles developed in WP 2.

WP 7 Risk and potential analysis

Contact person
Dipl.-Ing. Wolf Raber, inter 3 GmbH - Institute for Resource Management, Otto-Suhr-Allee 59, 10585 Berlin, e-mail: raber@inter3.de

Project partner
TU-AT, TU-AW, EnviroChemie, HSRM, BS-Partikel

Short description
To maximise the broad application of the EmiStop optimisation approaches and avoidance strategies, the risks and potentials were identified from the perspective of the key actors, evaluated and fed into the project at an early degree of technology maturity. Furthermore, an expert-supported set of sociopolitical, economic, and ecological evaluation criteria and a meaningful set of indicators were derived in order to analyse and evaluate the multicriterial optimisation approaches and avoidance strategies and in a next step measures for implementation and diffusion.

WP 8 Management and communication

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com Dr. Anja Steglich, inter 3 GmbH - Institute for Resource Management, 10585 Berlin, e-mail: steglich@inter3.de

Project partner
TU-AT, TU-AW, HSRM, BS-Partikel

Short description
In order to disseminate and implement the project results, industrial companies were actively involved and dialogue is carried out with experts from relevant industry associations (e.g. PlasticsEurope e.V., IK Industrievereinigung Plastikverpackungen e.V., GKV Gesamtverband Plastikverarbeitende Industrie e.V.). The collaboration was commissioned to a) develop the results into a consensual overall perspective, b) prepare these into action-oriented and implementable guidelines and c) make them available via established channels and multipliers, e.g. the Responsible Care Initiative of the chemical industry.

Coordinator

Dr.-Ing. Eva Bitter
EnviroChemie GmbH
In den Leppsteinswiesen 9
64380 Rossdorf
Phone: +49 6154-6998-57
e-mail: eva.bitter@envirochemie.com

Website

http://www.emistop.de/page8.html

Partner Institutions

Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering

Technical University of Darmstadt, Institute IWAR, Department of Wastewater Technology

RheinMain University, Institute for Environmental and Process Engineering / HSRM

inter 3 GmbH-Institute for Resource Management

BS-Partikel GmbH

Duration Period

January 2018