Exploitation

Factsheet 6: Recycling von PET-Verpackungen - Innovatives PET-Recycling aus Mehrschichtverbunden

janna.vakili@ecologic.eu — Tue, 04 May 2021 09:30:25 +0000

Factsheet 6: Recycling PET packaging - Innovative PET recycling of multilayer composites janna.vakili@e… Tue, 05/04/2021 - 11:30

Titelbild

Beschreibung

Most consumers are familiar with PET from the supermarket. In addition to beverage bottles, PET can be found in packaging trays for cheese, salads, fruit, meat or fish. Each foodstuff places its own demands on the plastic packaging. As a result, most plastic packaging is a mixture of different plastics with suitable properties.

While this has a positive effect on the transport possibilities and shelf life of the foodstuffs, these composite materials cannot be recycled or can only be recycled with great difficulty. This is where the 6th factsheet comes in and presents the innovative revolPET® technology. This process, developed in the revolPET joint project, allows selective depolymerization of the PET content and high-quality production of PET. It thereby takes an important place on the way towards a circular economy.

The factsheet is available here for PDF download.

Attachments

Factsheet 6 of the BMBF Research Focus Plastics in the Environment.

Joint project

revolPET

Year

2021

Author

Authors

Carsten Eichert

Lars Biermanns

Vitalij Salikov

Esther Brepohl

Clemens Müller

Mandy Paschetag

Stephan Scholl

Type of Result

factsheets

Citation

Eichert, Carsten; Biermann, Lars; Salikov, Vitalij; Brepohl, Esther; Müller, Clemens; Paschetag, Mandy; Scholl, Stephan (2021): Recycling PET packaging: Innovative PET recycling of multilayer composites. Fact sheet 6 of the BMBF research focus „Plastics in the Environment“.

Tags

Decomposition products

Business management

Depolymerization

Entry points

Food packaging

Optimization process

Polyethylene terephthalate (PET)

Polymer

Resource conservation

Publikationstyp

Factsheet 4: Tracer-Based-Sorting mit Fluoreszenz-Tracern - Effizientes und flexibles Sortieren von Kunststoffverpackungen

janna.vakili@ecologic.eu — Thu, 15 Apr 2021 07:21:07 +0000

Factsheet 4: Tracer-Based Sorting with Fluorescent Tracers - Efficient and flexible sorting of plastic packaging janna.vakili@e… Thu, 04/15/2021 - 09:21

Titelbild

Beschreibung

The German Packaging Act calls for a significant increase in recycling rates for plastics. In order to be able to produce high-quality recyclates, plastic articles must be separated by type. However, there is currently a lack of satisfactory identification options for the many different plastics.

This is where the technology from MaReK comes in. The joint project successfully developed a detection system using fluorescence tracers, which can significantly improve the sorting and recycling of plastic packaging in the sense of a circular economy.

The fourth factsheet presents the technology, its application areas and its relevance in further detail. It is available here as a PDF download.

Attachments

Factsheet 4 of the BMBF Research Focus Plastics in the Environment.

Joint project

MaReK

Year

2021

Author

Jörg Woidasky

Claus Lang-Koetz

Johannes Gasde

Jochen Moesslein

Authors

Type of Result

factsheets

Citation

Woidasky, Jörg; Lang-Koetz, Claus; Gasde, Johannes, Moesslein, Jochen (2021): Tracer-Based Sorting with Fluorescent Tracers: Efficient and flexible sorting of plastic packaging. Fact sheet 4 of the BMBF research focus „Plastics in the Environment“.

Tags

Database

Design for Recycling

Farbpartikel

Fluorescence marker-based sorting technology

Resource conservation

Publikationstyp

Factsheet 2: Wertvoller Alt-Kunststoff - Schwimmende Recyclinganlage verwertet Plastik bevor er ins Meer gelangt

janna.vakili@ecologic.eu — Fri, 05 Mar 2021 09:18:56 +0000

Factsheet 2: Valuable waste plastic - Floating recycling plant recovers plastics before they enter the sea janna.vakili@e… Fri, 03/05/2021 - 10:18

Titelbild

Beschreibung

In this factsheet, joint project KuWert shows how plastic recycling can be profitable. The research team developed a floating recycling platform, mobile and independent of local structures. The system was tested in coastal cities in West Africa, where a lot of plastic ends up in the sea.

Since high-quality plastic recyclate can only be obtained from clean and pre-sorted old plastic, the team worked with a large number of plastic collectors on land and processors on board. This not only created employment, but also prevented over 60,000 tons of plastic per year from ending up in the oceans. At the same time, value chains were established and a contribution made to climate protection.

The contents of the factsheet are based on research results of the joint project KuWert "Ship-based treatment of plastics for the implementation of value chains". It is available here for PDF download.

Attachments

Factsheet 2 of the BMBF Research Focus Plastics in the Environment.

Further Links

Verbundprojekt KuWert

Joint project

KuWert

Year

2021

Author

Fridtjof Rohde

Type of Result

factsheets

Citation

Rohde, Fridtjof (2021): Valuable waste plastic: Floating recycling plant recovers plastics before they enter the sea. Fact sheet 2 of the BMBF research focus „Plastics in the Environment“.

Publikationstyp

Ergebnis

Factsheet 1: Plastikverpackungen - Welche Einsparmöglichkeiten gibt es beim Kleiderkauf?

janna.vakili@ecologic.eu — Wed, 10 Feb 2021 13:38:16 +0000

Factsheet 1: Plastic Packaging - What are the possibilities for reducing waste when buying clothes? janna.vakili@e… Wed, 02/10/2021 - 14:38

Titelbild

Beschreibung

The first factsheet of the research focus is dealing with the question of how consumers can save plastic when buying clothes. It is often difficult to know how much plastic is produced along the textile value chain, before a product arrives in the store. Due to this lack of visibility, it is usually not possible for consumers to estimate the actual amount of packaging of a garment and to act accordingly. The factsheet picks up on this issue and explains at which points in the supply chain plastic packaging waste is generated. It also discusses the role of industry and consumers in this context and points out avoidance strategies.

The contents of the factsheet are based on research results of the joint project VerPlaPoS. The factsheet is available here for PDF download.

Attachments

Factsheet 1 of the BMBF Research Focus Plastics in the Environment.

Joint project

VerPlaPoS

Year

2021

Type of Result

factsheets

Citation

Decker, Thomas; Lippl, Maria; Frommeyer, Britta; Koch, Julia; von Gehlen, Kristina; Tornow, Maren; Habermehl, Tabea; Niedermeier, Andreas (2021): Plastic Packaging: What are the possibilities for reducing waste when buying clothes? Fact sheet 1 of the BMBF research focus „Plastics in the Environment“.

Publikationstyp

Ergebnis

Querschnittsthema

QST 4

Quiz: Plastik in der Umwelt - Was wissen Sie?

Mandy — Thu, 14 Jan 2021 11:21:04 +0000

Quiz: Plastic in the Environment – What do you know? Mandy Thu, 01/14/2021 - 12:21

Titelbild

Beschreibung

When I wash a polyester fleece jacket, can microplastics get into the water? How many climate-damaging greenhouse gases are released annually due to the global production of plastics and what is chemical recycling?

Plastics are all around us and make up an essential part of our daily lives. How much do we know about this material, its variety, the associated environmental problems and possible solutions? The quiz "Plastics in the environment - What do you know?" invites you to test your knowledge around the topic of plastics in five categories. Furthermore, the category "Questions for adults & children" contains questions suited for children.

The quiz was developed within this research focus. The quiz is available on this website and is suitable for all common browsers on computers and mobile devices.

Further Links

Link zum Quiz

Year

2020

Author

Mandy Hinzmann (Content)

Janna Vakili (Content)

Lena Aebli (Design)

Prasanna Ramesh (Programming)

Authors

Type of Result

educational material

Tags

Publikationstyp

Ergebnis

EmiStop

KALEH — Tue, 19 Dec 2017 16:41:32 +0000

EmiStop KALEH Tue, 12/19/2017 - 17:41

Identification of Industrial Plastic Emissions by Means of Innovative Detection Methods and Technology Development to Prevent the Input into the Environment via the Wastewater Pathway

This project systematically detected emissions of plastics into wastewater from relevant industries. Emissions levels were analysed along all points of the value chain (production, transport, processing, and cleaning of synthetic materials).

The goal was to select wastewater treatment technologies that optimise the reduction of emissions of plastics for the respective value chain. The project evaluated existing technologies for separating particles, investigated deposition rates, and developed approaches for technical optimisation. Optimisation also includes technological developments such as flocculants. Researchers conducted tests in both laboratory and pilot project settings – selected large scale technical wastewater treatment plants were investigated at industrial facilities.

Due to the existing analytical uncertainties, the following detection methods were used to evaluate the existing and developed technologies:

Dynamic differential calometry for qualification and quantification (concentrations)
Raman spectroscopy for qualification and quantification (particle numbers)
Correlations of the plastic concentrations to routine water chemical analyses (for a retrospective estimation of the plastic loads)
Tracer test with magnetic plastic particles (simple and reliable quantification in large dilutions) for balancing in laboratory and pilot tests

Apart from the technical aspects, the focus of this project was also on socio-economic aspects. Thus, measures to prevent economic losses and retain value were reviewed together with the associated industrial enterprises and evaluated with partners from the scientific community and other interest groups.

Main areas of work

Standardisation of sampling and sample preparation for industrial wastewater (in alignment with Plastik-Net and other joint research projects)
Quantitative and qualitative measurement of plastic concentrations in industrial wastewater using Raman spectroscopy and dynamic differential calorimetry
Extended data collection at the sampled industrial waste water treatment plants for the derivation of the plastic loads and testing of a correlation between the measurement results and routine water chemical analyses
Development of magnetic plastic particles in the micrometre range with the physical properties of relevant types of plastic
Development of a tracer test with magnetic plastic particles
Assessment of technologies for particle separation with regard to the retention of (micro-) plastic particles
Optimisation of particle separation technologies
Development of flocculants for the targeted improvement of the retention of individual types of plastics and their mixtures
Delphi surveys of industry and sector associations as well as of politics and science to identify perceived risks and obstacles as well as opportunities and the willingness to participate
Multi-criteria analysis for the development of weighted, ecological and socio-economic criteria for the sustainability assessment of the project results

Arbeitspakete

Work packages

WP 1 Development of analytical methods for plastic particles

Contact persons
Prof. Dr. Jutta Kerpen, RheinMain University, Institute for Environmental and Process Engineering, Department of Wastewater Treatment, Am Brückweg 26, 65428 Rüsselsheim, e-mail: jutta.kerpen@hs-rm.de

Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Prof. Dr.-Ing. Markus Engelhart, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Technology, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: m.engelhart@iwar.tudarmstadt.de

Project partner
EnviroChemie

Short description
A routinely applicable sampling and sample preparation procedure were developed in order to create a uniform and comparable database for industrial wastewater. For the subsequent qualification and quantification of microplastics in (industrial) wastewater samples, the methods of dynamic differential calorimetry and Raman spectroscopy were adapted to industrial wastewater. The respective analysis results were compared with standardised routine measurements and operational self-analysis to determine correlations.

WP 2 Tracer test

Contact persons
Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Dr. Kyriakos Eslahian, BS-Partikel GmbH, Nestléstr. 41, 55120 Mainz, e-mail: eslahian@bs-partikel.de

Short description
In order to balance individual process technologies for plastic particle retention in real water matrices, a method for the quantification of magnetic plastic particles by means of magnetic susceptibility scales was established. For this purpose, particles in the size range from 1 μm to 300 μm were synthesised with the greatest possible magnetic susceptibility, which imitate the morphologies and chemical properties of environmental plastic particles.

Furthermore, a continuous method for the production of these particles was established in order to ensure the best possible reproducibility and scalability for subsequent applications.

WP 3 Identification of industrial entry points

Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Project partner
EnviroChemie, inter 3

Short description
The entry points of microplastics from industrial wastewater into surface waters were determined by uniform characterisation and quantification of the plastic emissions of individual industrial plants. The evaluation of plastic emissions on the basis of mass flows, variations and production information with key figure system and balance tools, hotspots and temporal variations of the particle input were identified.

WP 4 Balancing of technical systems

Contact persons

Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner

TU-AW, inter3, HSRM

Short description
In laboratory and pilot tests, various process techniques (filtration in various filter units such as membrane plants, double-layer filters, cloth filters; flocculation in combination with filtration, flotation or sedimentation) were evaluated with regard to plastic particle removal. For this purpose, the tracer particles developed in WP 2 were used, which enable the use of synthetic and real industrial waste water. Furthermore, the existing industrial process technology was evaluated at different industrial sites and optimised with regard to the separation of plastic particles.

WP 5 Optimisation of plastic retention

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner
TU-AW

Short description
Based on the results of WP 4, the pilot plants were adapted by specific design changes (e.g. flow control, sludge removal, conveyor technology) and the success of these optimisations was evaluated in further balancing experiments. For the industries considered, in addition to constructive optimisation of process engineering, production-integrated measures to reduce plastic emissions were derived. The production information collected in WP 3 served as the basis for this.

WP 6 Development of flocculants for plastics sorts

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner
TU-AT, TU-AW

Short description
In experiments with beakers, individual polymers for the targeted flocculation of particles of different types of plastic in the size range from 10 to 300 μm were tested. The results were then used to test specific blends of polymers to produce the most stable flakes of particles of individual plastic types. With these results, the tests and developments were extended to mixtures of different types of plastics.

The laboratory test results were then supplemented by pilot tests using tracer particles developed in WP 2.

WP 7 Risk and potential analysis

Contact person
Dipl.-Ing. Wolf Raber, inter 3 GmbH - Institute for Resource Management, Otto-Suhr-Allee 59, 10585 Berlin, e-mail: raber@inter3.de

Project partner
TU-AT, TU-AW, EnviroChemie, HSRM, BS-Partikel

Short description
To maximise the broad application of the EmiStop optimisation approaches and avoidance strategies, the risks and potentials were identified from the perspective of the key actors, evaluated and fed into the project at an early degree of technology maturity. Furthermore, an expert-supported set of sociopolitical, economic, and ecological evaluation criteria and a meaningful set of indicators were derived in order to analyse and evaluate the multicriterial optimisation approaches and avoidance strategies and in a next step measures for implementation and diffusion.

WP 8 Management and communication

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com Dr. Anja Steglich, inter 3 GmbH - Institute for Resource Management, 10585 Berlin, e-mail: steglich@inter3.de

Project partner
TU-AT, TU-AW, HSRM, BS-Partikel

Short description
In order to disseminate and implement the project results, industrial companies were actively involved and dialogue is carried out with experts from relevant industry associations (e.g. PlasticsEurope e.V., IK Industrievereinigung Plastikverpackungen e.V., GKV Gesamtverband Plastikverarbeitende Industrie e.V.). The collaboration was commissioned to a) develop the results into a consensual overall perspective, b) prepare these into action-oriented and implementable guidelines and c) make them available via established channels and multipliers, e.g. the Responsible Care Initiative of the chemical industry.

Coordinator

Dr.-Ing. Eva Bitter
EnviroChemie GmbH
In den Leppsteinswiesen 9
64380 Rossdorf
Phone: +49 6154-6998-57
e-mail: eva.bitter@envirochemie.com

Website

http://www.emistop.de/page8.html

Partner Institutions

Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering

Technical University of Darmstadt, Institute IWAR, Department of Wastewater Technology

RheinMain University, Institute for Environmental and Process Engineering / HSRM

inter 3 GmbH-Institute for Resource Management

BS-Partikel GmbH

Duration Period

January 2018

December 2020

Tags

Sewage

Methodology of analyses

Sewage treatment plant

Environmental accounting

Polyethylene terephthalate (PET)

Polymer analysis

Polypropylene (PP)

Polystyrene (PS)

Polyvinyl chloride (PVC)

Project sheet

15_Projektblatt_EmiStop_ENG_2018.pdf

Koordinator label

Coordinator

KuWert

KALEH — Tue, 19 Dec 2017 16:12:48 +0000

KuWert KALEH Tue, 12/19/2017 - 17:12

Ship-Based Treatment of Plastics for the Implementation of Value Chains in Less Developed Countries as well as for the Prevention of Plastic Inputs into the Environment and Especially in Marine Ecosystems

The aim of the project was to develop concepts and preliminary planning for the implementation of an infrastructure for the collection, ship-based treatment, and marketing of plastic waste in order to reduce the input of plastic waste into the environment and marine ecosystems. The project's target regions were primarily less developed countries in the Global South. Using West Africa as an example, strategies for reducing the input of plastics (in this case macroplastics) into the environment were researched, because the input of macroplastics into the environment is particularly high when functioning waste collection and disposal systems are lacking. Stakeholder dialogues were conducted to assess whether a commodity chain based on plastic recyclates is possible on the West African coast. A prototype model ship was developed and used to determine costs.

Main areas of work

Data collection, analysis and evaluation (local conditions in less developed countries)
Preliminary planning of waste treatment plants
Design of a concept for suitable ship and plant technology
Development of strategies for the implementation of value chains in less developed countries
Analysis and evaluation of results (economic, ecological)

Arbeitspakete

Work packages

WP 1 Basic evaluation – recording of plastic waste

Contact person
Dr. Martin Wittmaier, IEKrW, Neustadtswall 30, 28199 Bremen, e-mail: wittmaier-office@hs-bremen.de

Project partner
TECHNOLOG, Nehlsen, University of Mauritius, University of Sierra Leone

Short description
It was of utmost importance for the processing of the entire project to gain knowledge of the composition of the plastic waste that potentially was collected in less developed countries. To this end, data and information (types, qualities, quantities, framework conditions, logistics, etc.) were first collected, analysed and evaluated, including on site in the example countries Sierra Leone and Mauritius.

WP 2 Pre-design of a treatment and recovery plant

Contact person
Dr. Sven Rausch, Nehlsen GmbH & Co. KG, Wilhelm-Karmann-Str. 5, 28237 Bremen, e-mail: sven.rausch@nehlsen.com

Project partner
TECHNOLOG, IEKrW, University of Mauritius, University of Sierra Leone

Short description
In this WP, waste treatment plants were planned in various variants. For this purpose, national and international framework conditions connected with the construction and operation of the ship-based facilities to be developed were determined. Various known procedures were evaluated and tested for their suitability, as were requirements for operation, maintenance and repair. On this basis, the objectives for the treatment of plastic waste were defined, followed by the development of conceptual designs.

WP 3 Concept development (ship and plant engineering)

Contact person
Fridtjof Rohde, TECHNOLOG, Vorsetzen 50, 20459 Hamburg, e-mail: fridtjof.rohde@tlg-services.biz

Project partner
IEKrW, Nehlsen

Short description
Preliminary designs for up to three variants of carrier vessels/semi-submersibles for the treatment of plastic waste were developed with alternative shipbound logistics concepts. Rough planning included room planning and process-oriented arrangement of facilities, equipment for maritime technology, equipment for waste treatment plants, etc. The production costs and energy requirements were also determined and the variants were compared economically.

WP 4 Marketing potential of secondary raw materials

Contact person
Dr. Sven Rausch, Nehlsen GmbH & Co. KG, Wilhelm-Karmann-Straße 5, 28237 Bremen, e-mail: sven.rausch@nehlsen.com

Project partner
IEKrW, TECHNOLOG

Short description
The market for secondary raw materials was examined, since these are fundamentally valuable. Tradeable products from plastic waste were identified and the quality requirements to be met specified. Possible revenues were also estimated. The resulting technical requirements for processing technology and quality management were taken into account in the other WPs. Based on the results, strategies for the most economical processing and marketing of products made from plastic waste were developed.

WP 5 Profitability analysis and life cycle assessment

Contact person
Dr. Martin Wittmaier, IEKrW, Neustadtswall 30, 28199 Bremen, e-mail: wittmaier-office@hs-bremen.de

Project partner
TECHNOLOG, Nehlsen

Short description
The concepts and preliminary planning for the ship-based collection, processing and marketing of plastic waste from less developed countries developed in the project were evaluated under economic and ecological aspects. On the basis of the results, the ecological advantages (reduction of the input of plastics into the environment, protection of resources by recycling plastic waste) were determined. The evaluation of the economic efficiency was intended to assess the chances of realisation and provide a planning framework for potential investors, funding providers and operators of a ship-based collection and treatment plant for plastic waste.

WP 6 Project management, public relations, recycling concept

Contact person
Fridtjof Rohde, TECHNOLOG, Vorsetzen 50, 20459 Hamburg, e-mail: fridtjof.rohde@tlg-services.biz

Project partner
IEKrW, Nehlsen

Short description
Within the framework of WP 6, work was carried out on internal and external communication (project meetings, workshops, communication between national and international partners including maintaining contacts with interested shipping companies/shipowners, public relations, etc.) and project management (administrative and content-related reporting, work and progress control and coordination, etc.).

Coordinator

Fridtjof Rohde
TECHNOLOG Services GmbH
Vorsetzen 50
20459 Hamburg
Phone: +49 40 7070768-20
e-mail: fridtjof.rohde@tlg-services.biz

Website

http://www.KuWert.hs-bremen.de

Partner Institutions

Hochschule Bremen – City University of Applied Sciences, Institute for Energy, Recycling and Environmental Protection / IEKrW

Nehlsen GmbH & Co. KG

Duration Period

August 2017

December 2019

Tags

Waste reduction

Waste management

Methodology of analyses

Environmental accounting

Optimization process

Plastic littering

Reduction of plastic use

Polyamide (PA)

Polyester

Polyethylene (PE)

High density polyethylene PE-HD

Polyethylene terephthalate (PET)

Polyvinyl chloride (PVC)

Resource conservation

Risk assessment

Secondary raw materials

Sorting

Stakeholder

Material flow managment

Project sheet

13_Projektblatt_KUWERT_ENG_2018.pdf

Koordinator label

Coordinator

MaReK

KALEH — Tue, 19 Dec 2017 16:01:40 +0000

MaReK KALEH Tue, 12/19/2017 - 17:01

Marker-Based Sorting and Recycling System for Plastic Packaging

The goal of this project was to set up a markerbased system for sorting and recycling that involves every stage from packaging development and sorting technology to high quality material reuse. The MaRek project demonstrated the usefulness of fluorescent markers for waste management applications. For this purpose, the use of the TBS technology developed and patented by the project partner Polysecure was piloted as a possible solution and then tested in an industry-relevant way, especially for the sorting of plastic packaging (LVP). The speed, effectiveness and economic efficiency of sorting different compositions of the collection fractions were investigated under industry-relevant boundary conditions. The project addressed the entire value chain of the packaging life cycle from design to process development for marker application and sorting to recovery of the materials. Approaches to a new packaging governance were elaborated with the relevant stakeholders and, in the medium term, should serve as a basis for more sustainable packaging use in addition to the technical results of the project. In this way, the developed process can make an important contribution to increasing the recycling rate required by the new packaging law.

Main areas of work

Representative recycling of lightweight plastic packaging including determination of the technical residual value (material properties) and the added value potential
New or further development and industrial testing of the "tracer-based sorting" method with real batches from separate collection (pilot plant), for this purpose further development of tracer and detection technology
Applied innovation research for the investigation of drivers and obstacles of the developed technology and their application in the complex structure of stakeholders
Comprehensive analysis of energy and material flows and an assessment of possible environmental impacts of the developed technology taking into account the life cycle perspective

Arbeitspakete

Work packages

WP 1 Packaging design and supply

Contact person
Immo Sander, Werner & Mertz GmbH, Rheinallee 96, 55120 Mainz, e-mail: isander@werner-mertz.com

Project partner
Der Grüne Punkt – Duales System Deutschland, INEC – Pforzheim University, Polysecure

Short description
Development and provision of plastic packaging marked with markers from the non-food sector for the subsequent tests as well as the derivation of transferability potentials for further areas of application.

WP 2 Marker technology

Contact person
Prof. Dr. Bryce S. Richards, Karlsruhe Institute of Technology, Institute of Microstructure Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, e-mail: bryce.richards@kit.edu

Project partner
Polysecure

Short description
Adaptation of the fluorescence markers to the intended application.

WP 3 TBS sorting technology

Contact person
Jochen Moesslein, Polysecure GmbH, Engesserstr. 4a, 79108 Freiburg, e-mail: jochen.moesslein@polysecure.eu

Project partner
Der Grüne Punkt – Duales System Deutschland, INEC – Pforzheim University

Short description
Development of a TBS sorting machine for packaging including construction of a sorting pilot plant (sorting machine plus material feed and discharge as well as inline sensors).

WP 4 Sorting tests

Contact person
Stefan Wiethoff, Der Grüne Punkt – Duales System Deutschland GmbH, Frankfurter Straße 720–726, 51145 Köln (Porz-Eil), e-mail: stefan.wiethoff@gruener-punkt.de

Project partner
INEC – Pforzheim University, Polysecure, Werner & Mertz

Short description
Large-scale validation tests including determination of the quality and material properties of the sorted fractions.

WP 5 Innovation and sustainability analysis

Contact person
Prof. Dr.-Ing. Claus Lang-Koetz, Pforzheim University, Institute of Industrial Ecology, Tiefenbronner Straße 65, 75175 Pforzheim, e-mail: claus.lang-koetz@hs-pforzheim.de

Project partner
With the cooperation of all partners

Short description
Development of an energy and material flow model (economic, ecological, technical) and determination of the ecological and economic framework conditions as well as drivers and obstacles for a successful process on the market.

WP 6 Development of governance approaches

Contact person
Prof. Dr.-Ing. Claus Lang-Koetz, Pforzheim University, Institute of Industrial Ecology, Tiefenbronner Straße 65, 75175 Pforzheim, e-mail: claus.lang-koetz@hs-pforzheim.de

Project partner
With the cooperation of all partners

Short description
Development of stakeholder-specific approaches to increase recycling rates and to improve material flow quality.

WP 7 Transfer of results and external impact

Contact person
Prof. Dr.-Ing. Jörg Woidasky, Pforzheim University, Institute of Industrial Ecology, Tiefenbronner Straße 65, 75175 Pforzheim, e-mail: joerg.woidasky@hs-pforzheim.de

Project partner
With the cooperation of all partners

Short description
Informing the public about the results.

Coordinator

Prof. Dr.-Ing. Claus Lang-Koetz und Prof. Dr.-Ing. Jörg Woidasky,
Hochschule Pforzheim University,
Institute of Industrial Ecology/ INEC
Tiefenbronner Straße 65
75175 Pforzheim
Phone: 07231/28-6427 bzw. -6489
e-mail: claus.lang-koetz@hs-pforzheim.de; joerg.woidasky@hs-pforzheim.de

Website

https://www.hs-pforzheim.de/en/research/research_institutes/inec/projects/marek

Partner Institutions

Polysecure GmbH

Werner & Mertz GmbH

Der Grüne Punkt – Duales System Deutschland GmbH

Karlsruhe Institute of Technology, Institute of Microstructure Technology / KIT-IMT

Associated Partners

Umwelttechnik BW GmbH, State Agency for Environmental Technology and Resource Efficiency Baden-Württemberg / UTBW

Subcontractor

CMO-SYS GmbH

Nägele Mechanik GmbH