Balancing

Factsheet 11: Mikroplastik in der Abwasserbehandlung - Methodenentwicklung für Probenahme und Analyse zur Erfassung der Eintragsmengen in Oberflächengewässer

janna.vakili@ecologic.eu — Thu, 06 May 2021 12:46:43 +0000

Factsheet 11: Microplastics in wastewater treatment - Development of sampling and analysis methods for detection of input quantities into surface waters janna.vakili@e… Thu, 05/06/2021 - 14:46

Titelbild

Photo: © Institute of Hydroscience, University of the Federal Armed Forces Munich

Beschreibung

It is not easy to determine how much microplastic is contained in wastewater and sewage sludge. In addition to plastic, countless other particles and substances are present. To reliably determine the concentration of microplastic particles, complex procedures for sampling as well as for removal of foreign substances and analysis of the microplastic particles are required.

The PLASTRAT research team has set itself the task of developing methods for these procedures and thus advancing the detection of inputs to surface waters. In this context, they provide important insights into the relevance of wastewater treatment plants as a retention option for plastic particles.

The project focuses on the quantification and technical reduction potential of plastic emissions in the field of urban water management, including sewage sludge treatment. The results on method development have been summarized in the 11th fact sheet of the research focus. The fact sheet is available for PDF download here.

Attachments

Factsheet 11 of the BMBF Research Focus Plastics in the Environment.

Joint project

PLASTRAT

Year

2021

Author

Authors

Natalie Wick

Steffen Krause

Christian Schaum

Franziska Fischer

Dieter Fischer

Franziska Klaeger

Juliana Ivar do Sul

Matthias Labrenz

Type of Result

factsheets

Citation

Wick, Natalie; Krause, Steffen; Schaum, Christian; Fischer, Franziska; Fischer, Dieter; Klaeger, Franziska; Ivar do Sul, Juliana; Labrenz, Matthias (2020): Microplastics in wastewater treatment: Development of sampling and analysis methods for detection of input quantities into surface waters. Fact sheet 11 of the BMBF research focus „Plastics in the Environment“.

Publikationstyp

Ergebnis

Factsheet 5.1: Mikroplastik aus industriellem Abwasser entfernen - Verfahrensverbesserungen durch Flockungsmittel

janna.vakili@ecologic.eu — Tue, 27 Apr 2021 10:02:22 +0000

Factsheet 5.1: Removing microplastics from industrial wastewater - Process improvements through the use of flocculants janna.vakili@e… Tue, 04/27/2021 - 12:02

Titelbild

Beschreibung

Microplastics can enter our wastewater along the entire value chain. Removal options exist primarily in wastewater treatment plants, here in the form of filtration, flotation and sedimentation processes. The removal performance of wastewater treatment plants determines how much microplastic is discharged into the environment.

Building on this, Factsheet 5.1 addresses the question of how current processes can be further improved. In this context, the researchers paid particular attention to the influence of flocculants on separation performance. The joint project EmiStop conducted over 1,000 flocculation tests with 9 flocculant combinations on 17 types of plastics. The results show that flocculants can increase process efficiency up to 99.9% removal efficiency.

In the EmiStop research project, industrial plastic emissions were qualitatively and quantitatively identified using innovative detection methods, and technologies to prevent environmental input via the wastewater pathway were evaluated and optimized.

The factsheet 5.1 is available for PDF download here.

Attachments

Factsheet 7.2 of the BMBF Research Focus Plastics in the Environment.

Joint project

EmiStop

Year

2021

Author

Authors

Mark Masch

Eva Bitter

Type of Result

factsheets

Citation

Masch, Mark; Bitter, Eva (2021): Removing microplastics from industrial wastewater: Process improvements through the use of flocculants. Fact sheet 5.1 of the BMBF research focus "Plastics in the Environment“.

Tags

Sewage treatment plant

Publikationstyp

InRePlast

Stephan.Guertler — Fri, 01 Mar 2019 09:03:22 +0000

InRePlast Stephan.Guertler Fri, 03/01/2019 - 10:03

Environmental Policy Instruments to Reduce Plastic Pollution of Inland Waters through Drainage Systems

The project aimed to make a significant, transdisciplinary contribution to applied research on the prevention of plastic discharges into water bodies via drainage systems from a behavioural and environmental economics perspective. In four model municipalities, the project recorded the quantity and type of plastics discharged into the drainage systems via wastewater and precipitation water collection in municipal wastewater treatment plants and precipitation drains within one year. The data obtained was then extrapolated for Germany by means of material flow analysis. With regard to regulatory deficits, instruments to reduce plastic inputs were developed in an interplay of legal and behavioural economics analyses. Selected instruments were tested in field experiments in companies and households. On this basis, the project partners developed policy briefs that inform policymakers, practitioners and associations about ways to measure and reduce plastic inputs into the environment.

Main areas of work

Analysis of legal framework conditions
Empirical investigations of plastic discharges into the drainage systems of four model municipalities
Model-based visualisation of the material flows from the considered input sources, namely households, transport routes and companies of the plastics industry in the model municipalities
Development of behaviour-based measures to motivate behavioural changes
Computer simulations of the effects of behaviour-based measures
Evaluation of the effect of measures by means of field experiments

Arbeitspakete

Work packages

WP 1: Inventory of the entry points of plastics into the drainage systems

Contact person

Dr. Marco Breitbarth, Research Institute for Water and Waste Management at RWTH Aachen (FIW), Kackertstraße 15 – 17, 52056 Aachen, e-mail: breitbarth@fiw.rwth-aachen.de

Project partners

City of Aachen, City of Stolberg, Simmerath Municipality, Roetgen Municipality, University of Kassel, Darmstadt University of Applied Sciences

Short description

The aim of this work package was to determine the status quo of plastic discharges into the drainage systems in the four selected model municipalities, which represent different settlement structures. For this purpose, the type and quantity of plastic products as well as their sources from households, industry, traffic and other activities related to wastewater collection and drainage of paved areas were determined.

WP 2: Development of a concept for multi-criteria, behavior-oriented set of instruments

Contact persons

Prof. Dr. Anja Hentschel, Darmstadt University of Applied Sciences, Department of Social Sciences, Professorship for Environmental and Energy Law, Haardtring 100, 64295 Darmstadt, e-mail: anja.hentschel@h-da.de

Dr. Maria Daskalakis, University of Kassel, Department of Economics, Division of Economic Policy, Innovation and Entrepreneurship, Environmental Policy Working Group, Nora-Platiel-Str. 4, 34109 Kassel, e-mail: daskalakis@wirtschaft.uni-kassel.de

Project partners

Prof. Dr. Frank Beckenbach, FIW

Short description

Starting from a behavioural economics analysis of relevant behavioural effects regarding the use of plastics in households and companies and possible approaches to motivate changes in their use as well as an investigation and deficit analysis of the existing legal framework at national and European level, behavioural measures and instruments were identified. Their effects with regard to ecological, social, technical, legal and economic feasibility were assessed. The result was a preliminary set of instruments, which were used as a basis for all further investigations and were adapted if necessary.

WP 3: Empirical analyses of success factors and barriers

Contact persons

Dr. David Hofmann, University of Kassel, Department of Economics, Division of Economic Policy, Innovation and Entrepreneurship, Environmental Policy Working Group, Nora-Platiel-Str. 4, 34109 Kassel, e-mail: dhofmann@uni-kassel.de

Project partners

City of Aachen, City of Stolberg, Simmerath Municipality, Roetgen Municipality, Prof. Dr. Frank Beckenbach, FIW, Darmstadt University of Applied Sciences

Short description

The empirical determination of the success factors and barriers of instruments for the reduction of plastic inputs via the drainage systems was based on the concept of multi-criteria behaviour-oriented instrumentation. The focus of the investigations were the actor groups households and companies. The investigations were preceded by expert discussions. A methodological triangulation was used: semi-structured, guideline-supported in-depth interviews were carried out as well as, in the case of households, a telephone survey and, in the case of households and companies, a field experiment.

WP 4: Material flow models of plastic inputs into canalisation systems and wastewater treatment plants

Contact person

Dr. Marco Breitbarth, Research Institute for Water and Waste Management at RWTH Aachen (FIW), Kackertstraße 15 – 17, 52056 Aachen, e-mail: breitbarth@fiw.rwth-aachen.de

Project partners

University of Kassel, Darmstadt University of Applied Sciences

Short description

Material flow models for plastic discharges of macro- and microplastics from the identified sources into the drainage systems were developed for the four model communities. Based on the model results, the sources and product types were analysed and evaluated with regard to their relevance for the plastic inputs. The data from the municipalities was then extrapolated to the federal level in a general model.

WP 5: Actor-based computer model and simulations for the development of material flows

Contact persons

Project partners

Prof. Dr. Frank Beckenbach, FIW, Darmstadt University of Applied Sciences

Short description

In this work package the design and development of multi-agent systems was carried out, which cover the actor groups households and companies. Based on the actor concept of WP 2, the multi-agent systems map actor-related decision-making processes and determinants of plastics use were linked to the material flow models from WP 4 in a subsequent step. Different legal and behavioural instruments and their material-ecological and economic implications were analysed and evaluated on the basis of different scenarios.

WP 6: Finalisation of the concept of multi-criteria, behaviour-oriented set of instruments

Contact person

Project partners

Prof. Dr. Frank Beckenbach, University of Kassel, FIW

Short description

In parallel to work packages 3 to 5, the concept of multi-criteria behaviour-oriented set of instruments were further specified by including the results of empirical studies and the multi-agent system. For the identified instruments and measures, it was estimated how they could work in practice, what control and enforcement effort they might create for authorities, whether they could be combined in certain areas, and what medium- and long-term effects the regulations could have. The adjustments to the concept were tracked and evaluated through computer simulations.

WP 7: Developing proposals for implementation

Contact persons

Dr. Marco Breitbarth, Research Institute for Water and Waste Management at RWTH Aachen (FIW), Kackertstraße 15 – 17, 52056 Aachen, e-mail: breitbarth@fiw.rwth-aachen.de

Project partner

Prof. Dr. Frank Beckenbach

Short description

The project results were prepared for political and practical implementation. For this purpose, recommendations for action were summarised in the form of policy briefs, which are intended to offer support to various actors for the implementation of the developed instrument packages. The project addressed the federal, state and local levels (legislators and authorities), consumer associations and NGOs as well as companies and associations of the plastics industry in order to facilitate the effective implementation of the measures.

Coordinator

Dr. Maria Daskalakis
University of Kassel, Department of Economics, Division of Economic Policy, Innovation and Entrepreneurship,
Environmental Policy Working Group
Nora-Platiel-Str. 4
34109 Kassel
Phone: +49 561 804-3052
e-mail: daskalakis@wirtschaft.uni-kassel.de

Website

www.inreplast.de

Partner Institutions

Darmstadt University of Applied Sciences, Professorship for Environmental and Energy Law

Research Institute for Water and Waste Management at RWTH Aachen / FiW

Associated Partners

City of Aachen

City of Stolberg

Simmerath Municipality

Roetgen Municipality

Wasserverband Eifel-Ruhr / WVER

BKV GmbH

German Association for Plastics Packaging and Films / IK

PlasticsEurope Germany

Kunststoff-Zentrum SKZ

German Federal Environmental Agency

DHB – Netzwerk Haushalt

BildungsCent e.V.

Prof. Dr. Frank Beckenbach, Cusanus Hochschule, Bernkastel-Kues

Duration Period

January 2019

December 2021

Tags

Sewage treatment plant

Multi-criteria evaluation

Standardization

Strategy on plastics

Plastic littering

Reduction of plastic use

Prevention of plastics

minimization strategies

Regulation

Project sheet

Project-sheet-InRePlast-2019.pdf

Koordinator label

Coordinator

Innoredux

Stephan.Guertler — Fri, 15 Feb 2019 10:30:10 +0000

Innoredux Stephan.Guertler Fri, 02/15/2019 - 11:30

Business Models for Reducing Plastic Waste along the Value Chain: Paths to Innovative Trends in Retailing

The idea and goal of Innoredux was to develop and implement innovative packaging solutions in distance and stationary retailing using a living lab research approach in order to avoid or reduce plastic waste along the value chain.

The subject of investigation and the focus of research were innovations in trade for waste prevention and reduction within the framework of business models and the underlying value chains. The potential of their expansion from niches into the mainstream was investigated. The project focussed on reduction measures through a more efficient use of materials, substitution (alternative ecologically compatible materials) and through influencing consumers' decision-making behaviour in purchasing. Such innovative reduction measures can contribute significantly to the reduction of plastic discharges into the environment and at the same time generate competitive advantages.

In a living lab in the city of Heidelberg, business models were tested and implemented in cooperation with a number of partners from the retail sector and civil society. On the basis of the results of the living lab, guidelines for municipalities and companies were developed. The project focused on four product groups: food, cosmetics, office supplies and textiles.

Main areas of work

Analysis of interdependencies and decision-making processes along the value chain (production - trade - consumption)
Development of innovative business models to avoid packaging
Testing of innovative approaches for low-plastic packaging in a living lab in Heidelberg
Balancing the ecological, economic and social impacts of the business models identified as innovative
Development and dissemination of guidelines for companies and municipalities

Arbeitspakete

Work packages

WP 1 Developing a typology of plastic waste prevention business models through innovative packaging solutions

Contact person

Dr. Frieder Rubik, Institute for Ecological Economy Research (IÖW), Bergstraße 7, 69120 Heidelberg
e-mail: frieder.rubik@ioew.de

Project partners

ifeu, Alnatura, Annas Unverpacktes Heidelberg, Avocado Store, dm, Memo, Unverpackt e. V., Zalando

Short description

In a first step, existing business models that contribute to the reduction of packaging (especially plastic packaging) along the value chain were examined and categorised. The project partners analysed existing innovative, instructive and plastic-reducing solutions with a strong leverage effect and estimated the reduction potential via quantity balances (waste types, waste quantities, etc.).

WP 2 Balancing, identification of best practices and success factors

Contact person

Dr. Pauline Riousset, Institute for Ecological Economy Research (IÖW), Potsdamerstraße 105, 10785 Berlin
e-mail: pauline.riousset@ioew.de

Project partners

ifeu, Alnatura, Annas Unverpacktes Heidelberg, Avocado Store, BUND, BUND Heidelberg, dm, Memo, City of Heidelberg, Unverpackt e. V., Zalando

Short description

This work package analysed the ecological, social and economic impacts of business model innovations and identifies their success factors. To this end, key data and model examples were collected as preparatory work for the company checklists and the handbook for a municipal concept for comprehensive plastic prevention and reduction (so-called "conceptual handbook for municipalities"; WP 4). The potential impact of municipal support was assessed.

WP 3 Design of options for action and testing in a living lab

Contact person

Dr. Frieder Rubik, Institute for Ecological Economy Research (IÖW), Bergstraße 7, 69120 Heidelberg
e-mail: frieder.rubik@ioew.de

Project partners

ifeu, Alnatura, Annas Unverpacktes Heidelberg, Avocado Store, BUND, BUND Heidelberg, dm, Memo, City of Heidelberg, Unverpackt e. V., Zalando

Short description

This work package included the implementation of a living lab with retail companies, the City of Heidelberg, BUND and consumers. Here, a strategy to reduce plastic waste, consisting of suggestions to improve business models and support from municipalities, was developed and tested.
Case studies: A living lab was conducted, i. e. a geographically and temporally defined testing area was created in which knowledge was exchanged, strategic partnerships were generated and solutions were tested. Together with the associated partners, the objectives and intention of the intervention/experiments and questions were defined (co-design) before options for action were developed and adapted and tested in a strategy for the local context of Heidelberg. The effects of the living lab were evaluated during the process.

WP 4 Strategy development and development of company checklists and conceptual guidelines for municipalities

Contact person

Dr. Pauline Riousset, Institute for Ecological Economy Research (IÖW), Potsdamerstraße 105, 10785 Berlin
e-mail: pauline.riousset@ioew.de

Project partners

ifeu, Alnatura, Annas Unverpacktes Heidelberg, Avocado Store, BUND, BUND Heidelberg, dm, Memo, City of Heidelberg, Unverpackt e. V., Zalando

Short description

The living lab results from WP 3 were transferred into the context of the considered product groups and the existing strategies are revised. The research results were used to develop company checklists and a conceptual handbook for municipalities and the dissemination phase were prepared (cf. WP 5).

WP 5 Dissemination of results

Contact person

Dr. Frieder Rubik, Institute for Ecological Economy Research (IÖW), Bergstraße 7, 69120 Heidelberg
e-mail: frieder.rubik@ioew.de

Project partner

ifeu

Short description

The transdisciplinary research approach required a reciprocal, project-accompanying transfer of knowledge and results. Therefore, an integrative work package was planned that encompasses all project work and affects all actors. In this work package, the focus was on describing the communication measures on the basis of the analysis of target groups and goals. The communication measures were based on the pillars "Information" - "Best Practice" - "Training" - "Imitation".

Coordinator

Dr. Frieder Rubik
Institute for Ecological Economy Research (IÖW)
Bergstraße 7
69120 Heidelberg
Phone: +49 6221-64916-6
e-mail: frieder.rubik@ioew.de

Website

www.plastik-reduzieren.de

Partner Institutions

ifeu – Institute for Energy and Environmental Research Heidelberg

Associated Partners

Alnatura GmbH

Annas Unverpacktes Heidelberg

Avocado Store GmbH

Friends of the Earth Germany / BUND

Friends of the Earth Baden-Württemberg, Group in the District of Heidelberg / BUND Heidelberg

dm-drogerie markt GmbH & Co. KG / dm

Duration Period

February 2019

January 2022

Project sheet

Project-sheet-Innoredux-2019.pdf

Koordinator label

Coordinator

Stakeholder-Dialog

linda.mederake@ecologic.eu — Tue, 04 Dec 2018 10:37:38 +0000

Stakeholder Dialogue linda.mederake… Tue, 12/04/2018 - 11:37

Titelbild

Beschreibung

As part of the joint research project "PlastikBudget - Development of budget approach and LCA impact assessment methodology for the governance of plastics in the environment", the Kulturwissenschaftliches Institut Essen and Frauenhofer UMSICHT are organising a stakeholder dialogue in Berlin on Monday and Tuesday, 18 and 19 February 2019.

The stakeholder dialogue will bring together representatives from environmental NGOs/civil society, science, industry and politics to discuss plastics issues. The following questions, among others, will be discussed with a total of around 30 stakeholders: What is an acceptable amount of plastics in the environment? What can companies and associations do and what do they do to reduce plastic waste emissions (given certain political conditions)? What communication and implementation strategies are proposed for a plastics budget and what are their chances of success?

Location

Berlin

Organiser

Kulturwissenschaftliches Institut Essen

Fraunhofer UMSICHT

Joint Project

PlastikBudget

Date

18 - 19 February 2019

18. - 19. Februar 2019

Event type

Joint Project Event

Image Gallery

Tags

Date sort

Mon, 02/18/2019 - 12:00

Hide on overview

Aus

PLAWES

KALEH — Wed, 20 Dec 2017 09:29:04 +0000

PLAWES KALEH Wed, 12/20/2017 - 10:29

Microplastic Contamination in the Weser- Wadden Sea – National Park Model System: an Ecosystem-Wide Approach

In PLAWES, the modelling system of the German national park Weser-Wadden Sea was the first large European river basin that was investigated in detail regarding its microplastic pollution. PLAWES conducted a pioneering study of the microplastic contamination from the headwaters to the North Sea (northern Atlantic Ocean) that comprised an interdisciplinary and integrated ecosystem approach and accounted for various point sources (wastewater treatment plants, separation systems) and diffuse sources (drainage, atmosphere) of pollution. The results were integrated into a model for identifying primary transport mechanisms and accumulation zones. The research investigated the effects of microplastics on ecosystems in the Weser-Wadden Sea system by analysing the interaction of microplastic with pathogens in biofilm and aquatic invertebrates. Outcomes of this particularly ecologically relevant aspects were used to estimate the environmental risk of microplastics for the model system, and subsequently made it transferable to other systems. In addition, the results of the analysis became part of new teaching materials in order to provide a knowledge platform for teachers, students, and parents across Europe. PLAWES generated unique data about the effects of microplastics on a large European river basin and its environment. This is significant not only for policymakers and stakeholders but also as a fundament for science-based solutions to address the microplastics problem.

Main areas of work

Microplastics in the Weser-Wadden Sea
Model-based balancing of diffuse and point sources of microplastic entries
Interaction of microplastics with pathogens and biota
Training measures to raise awareness of plastic waste

Arbeitspakete

Work packages

WP 0 Management, communication and dissemination

Contact person
Prof. Dr. Christian Laforsch, University of Bayreuth, Universitätsstraße 30, 95447 Bayreuth, e-mail: christian.laforsch@uni-bayreuth.de

Project partner
AWI

Short description
WP 0 ensured the targeted and efficient support of the consortium with regard to project management, communication and dissemination. WP 0 coordinated both the public relations work and the exploitation of the results achieved. WP 0 continued to coordinate the cooperation of all project partners and was therefore in close contact with all project partners. WP 0 coordinated the harmonisation with the joint research project MicroCatch_Balt with regard to sampling and processing, modelling, public relations, and data storage as well as communication with the other projects.

WP 1 Microplastics in the Weser-Wadden Sea model system

Contact person
Dr. Gunnar Gerdts, Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research, Kurpromenade, 27498 Helgoland, e-mail: gunnar.gerdts@awi.de

Project partner
UBT, UOld

Short description
The aim of WP 1 was to investigate the entire Weser river system into coastal waters with regard to microplastic pollution. The final determination of the exact sampling points was carried out taking into account the real data required for RAUMISmGROWA- MePhos and "Tidal Model" (WP 3). The entire Weser including the Lower Weser and the Wadden Sea was investigated with regard to exposure to microplastic. Two campaigns were carried out at different seasons with different water conditions on the Weser.

WP 2 Entry points – point sources and diffuse entry

Contact person
Prof. Dr. Andreas Held, University of Bayreuth, BayCEER; second affiliation: Technical University of Berlin, Department of Environmental Chemistry and Air Pollution Control, Straße des 17. Juni 135, 10623 Berlin, e-mail: held@tu-berlin.de

Project partner
AWI

Short description
The aim of WP 2 was an exemplary consideration of the input paths for microplastics by investigation of important point sources such as wastewater treatment plants and separation water sewer systems as well as the diffuse input from drains and atmosphere. For this purpose, selected sampling points in the Weser river basin were characterised taking into account different landscape areas and land use types. The focus lay on quantifying the entry points of microplastics. Sampling was synchronised with the campaigns at the Weser.

WP 3 Model-based accounting of diffuse and point-shaped MP entries

Contact person
Prof. Dr. Frank Wendland, Jülich Research Centre IBG-3, Wilhelm-Johnen-Straße, 52428 Jülich, e-mail: f.wendland@fz-juelich.de

Project partner
TI, NLWKN

Short description
The aim was a spatially resolved quantification of the microplastic emissions from diffuse and point sources and the identification of spatial load centres and accumulation zones within the river basin and estuary. The microplastic entries were modelled from different types of diffuse entry points and point sources. The work was based on the models mGROWA, MEPhos, RAUMIS, as well as a transport modelling considering the estuarine hydro- and sediment dynamics. Within the framework of the project, the model chain was improved in a targeted manner according to microplastic entry modelling in the inland and the further distribution of the microplastics in the lower reaches, estuary and apron.

WP 4 Interaction of microplastic with pathogens and biota

Contact person
Prof. Dr. Jörg Oehlmann, Goethe University Frankfurt, Max-von-Laue-Straße 13, 60438 Frankfurt am Main, e-mail: oehlmann@bio.uni-frankfurt.de

Project partner
AWI, UBT, UOld

Short description
In WP 4, the ecosystem effects of microplastic on the Weser-Wadden Sea model system were described on the basis of the two ecologically relevant aspects "Interaction with pathogens and antimicrobial resistance" and "Interaction with aquatic invertebrates".

Interaction with pathogens and antimicrobial resistance: Since biofilms are sites of increased genetic exchange and increased antimicrobial resistance occurs below wastewater treatment plants, plastics could not only contribute to the dispersion of pathogenic organisms, but also of resistance genes. The consequences of such a transfer were previously unknown. AWI therefore used molecular microbial source tracking techniques (DNA/RNA arrays for the detection of pathogenic bacteria, viruses, protozoa and virulence/resistance genes) to investigate plastic samples from the Weser region. Interaction with aquatic invertebrates: In order to generate exposure data, different mollusk species were applied in situ in the Weser, the tidal area and the Wadden Sea. Absorbed microplastic was examined in the digestive tract and in tissue samples and confirmed in parallel by pyrolysis-GC-MS and spectroscopic methods. Historical mussel samples (since 1986) from the Federal Environmental Specimen Bank (UBA) were examined using pyrolysis-GC-MS. The chronic toxicity of microplastic is characterised in laboratory experiments with mussels and worms. Different polymers were conditioned in situ and toxicologically characterised in chronic exposure experiments.

WP 5 Training measures to raise awareness of plastic waste

Contact person
Prof. Dr. Franz X. Bogner, University of Bayreuth, Didactics of Biology, Universitätsstraße 30, 95447 Bayreuth, e-mail: franz.bogner@uni-bayreuth.de

Project partner
AWI, UOld

Short description
In addition to the ethical assessment skills of students, WP 5 incorporated existing individual environmental knowledge. Innovative teaching materials with a sound reference to everyday life were evaluated for a holistic understanding regarding the burden of plastics in the model system and disseminated via an Internet teaching/learning portal. Within the work package, UBT provided a handbook for teachers and "public relations workers".

Coordinator

Prof. Dr. Christian Laforsch
University of Bayreuth
Chair of Animal Ecology I / UBT
Universitätsstraße 30
95447 Bayreuth
Phone: +49 921 / 55-2651
e-mail: christian.laforsch@uni-bayreuth.de

Dr. Gunnar Gerdts
Alfred Wegener Institute
Helmholtz Centre for Polar and Marine Research (AWI)
Kurpromenade
27498 Helgoland
Phone: +49 4725 / 819-3245
e-mail: gunnar.gerdts@awi.de

Website

http://www.bayceer.uni-bayreuth.de/PLAWES/en/

Partner Institutions

Coast Research Centre at the Lower Saxony State Enterprise for Water Management, Coastal Protection and Nature Conservation / NLWKN

Jülich Research Centre / FZJ

Goethe University Frankfurt / GU

Johann Heinrich von Thünen Institute - Federal Research Institute for Rural Areas, Forestry and Fisheries / TI-LR

Carl von Ossietzky University of Oldenburg, Institute of Chemistry and Biology of the Sea / UOld

Duration Period

September 2017

April 2021

Tags

Sewage

Methodology of analyses

Information and teaching materials

Infrared

Infraref spectroscopy

Sewage treatment plant

Sewage sludge

Municipality

Communication strategy

Combined sewar overflows

Prevention of plastics

Polyamide (PA)

Polyester

Polyethylene (PE)

High density polyethylene PE-HD

Polyethylene terephthalate (PET)

Polyvinyl chloride (PVC)

sampling

Sample purification

Pyrolysis GC

Raman microspectroscopy

Environmental sustainability

Scanning electron microscopy

Plasticiser

Project sheet

18_Projektblatt_PLAWES_ENG_2018.pdf

Koordinator label

Coordinator

EmiStop

KALEH — Tue, 19 Dec 2017 16:41:32 +0000

EmiStop KALEH Tue, 12/19/2017 - 17:41

Identification of Industrial Plastic Emissions by Means of Innovative Detection Methods and Technology Development to Prevent the Input into the Environment via the Wastewater Pathway

This project systematically detected emissions of plastics into wastewater from relevant industries. Emissions levels were analysed along all points of the value chain (production, transport, processing, and cleaning of synthetic materials).

The goal was to select wastewater treatment technologies that optimise the reduction of emissions of plastics for the respective value chain. The project evaluated existing technologies for separating particles, investigated deposition rates, and developed approaches for technical optimisation. Optimisation also includes technological developments such as flocculants. Researchers conducted tests in both laboratory and pilot project settings – selected large scale technical wastewater treatment plants were investigated at industrial facilities.

Due to the existing analytical uncertainties, the following detection methods were used to evaluate the existing and developed technologies:

Dynamic differential calometry for qualification and quantification (concentrations)
Raman spectroscopy for qualification and quantification (particle numbers)
Correlations of the plastic concentrations to routine water chemical analyses (for a retrospective estimation of the plastic loads)
Tracer test with magnetic plastic particles (simple and reliable quantification in large dilutions) for balancing in laboratory and pilot tests

Apart from the technical aspects, the focus of this project was also on socio-economic aspects. Thus, measures to prevent economic losses and retain value were reviewed together with the associated industrial enterprises and evaluated with partners from the scientific community and other interest groups.

Main areas of work

Standardisation of sampling and sample preparation for industrial wastewater (in alignment with Plastik-Net and other joint research projects)
Quantitative and qualitative measurement of plastic concentrations in industrial wastewater using Raman spectroscopy and dynamic differential calorimetry
Extended data collection at the sampled industrial waste water treatment plants for the derivation of the plastic loads and testing of a correlation between the measurement results and routine water chemical analyses
Development of magnetic plastic particles in the micrometre range with the physical properties of relevant types of plastic
Development of a tracer test with magnetic plastic particles
Assessment of technologies for particle separation with regard to the retention of (micro-) plastic particles
Optimisation of particle separation technologies
Development of flocculants for the targeted improvement of the retention of individual types of plastics and their mixtures
Delphi surveys of industry and sector associations as well as of politics and science to identify perceived risks and obstacles as well as opportunities and the willingness to participate
Multi-criteria analysis for the development of weighted, ecological and socio-economic criteria for the sustainability assessment of the project results

Arbeitspakete

Work packages

WP 1 Development of analytical methods for plastic particles

Contact persons
Prof. Dr. Jutta Kerpen, RheinMain University, Institute for Environmental and Process Engineering, Department of Wastewater Treatment, Am Brückweg 26, 65428 Rüsselsheim, e-mail: jutta.kerpen@hs-rm.de

Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Prof. Dr.-Ing. Markus Engelhart, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Technology, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: m.engelhart@iwar.tudarmstadt.de

Project partner
EnviroChemie

Short description
A routinely applicable sampling and sample preparation procedure were developed in order to create a uniform and comparable database for industrial wastewater. For the subsequent qualification and quantification of microplastics in (industrial) wastewater samples, the methods of dynamic differential calorimetry and Raman spectroscopy were adapted to industrial wastewater. The respective analysis results were compared with standardised routine measurements and operational self-analysis to determine correlations.

WP 2 Tracer test

Contact persons
Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Dr. Kyriakos Eslahian, BS-Partikel GmbH, Nestléstr. 41, 55120 Mainz, e-mail: eslahian@bs-partikel.de

Short description
In order to balance individual process technologies for plastic particle retention in real water matrices, a method for the quantification of magnetic plastic particles by means of magnetic susceptibility scales was established. For this purpose, particles in the size range from 1 μm to 300 μm were synthesised with the greatest possible magnetic susceptibility, which imitate the morphologies and chemical properties of environmental plastic particles.

Furthermore, a continuous method for the production of these particles was established in order to ensure the best possible reproducibility and scalability for subsequent applications.

WP 3 Identification of industrial entry points

Prof. Dr. Susanne Lackner, Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering, Franziska-Braun-Straße 7, 64287 Darmstadt, e-mail: s.lackner@iwar.tu-darmstadt.de

Project partner
EnviroChemie, inter 3

Short description
The entry points of microplastics from industrial wastewater into surface waters were determined by uniform characterisation and quantification of the plastic emissions of individual industrial plants. The evaluation of plastic emissions on the basis of mass flows, variations and production information with key figure system and balance tools, hotspots and temporal variations of the particle input were identified.

WP 4 Balancing of technical systems

Contact persons

Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner

TU-AW, inter3, HSRM

Short description
In laboratory and pilot tests, various process techniques (filtration in various filter units such as membrane plants, double-layer filters, cloth filters; flocculation in combination with filtration, flotation or sedimentation) were evaluated with regard to plastic particle removal. For this purpose, the tracer particles developed in WP 2 were used, which enable the use of synthetic and real industrial waste water. Furthermore, the existing industrial process technology was evaluated at different industrial sites and optimised with regard to the separation of plastic particles.

WP 5 Optimisation of plastic retention

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner
TU-AW

Short description
Based on the results of WP 4, the pilot plants were adapted by specific design changes (e.g. flow control, sludge removal, conveyor technology) and the success of these optimisations was evaluated in further balancing experiments. For the industries considered, in addition to constructive optimisation of process engineering, production-integrated measures to reduce plastic emissions were derived. The production information collected in WP 3 served as the basis for this.

WP 6 Development of flocculants for plastics sorts

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com

Project partner
TU-AT, TU-AW

Short description
In experiments with beakers, individual polymers for the targeted flocculation of particles of different types of plastic in the size range from 10 to 300 μm were tested. The results were then used to test specific blends of polymers to produce the most stable flakes of particles of individual plastic types. With these results, the tests and developments were extended to mixtures of different types of plastics.

The laboratory test results were then supplemented by pilot tests using tracer particles developed in WP 2.

WP 7 Risk and potential analysis

Contact person
Dipl.-Ing. Wolf Raber, inter 3 GmbH - Institute for Resource Management, Otto-Suhr-Allee 59, 10585 Berlin, e-mail: raber@inter3.de

Project partner
TU-AT, TU-AW, EnviroChemie, HSRM, BS-Partikel

Short description
To maximise the broad application of the EmiStop optimisation approaches and avoidance strategies, the risks and potentials were identified from the perspective of the key actors, evaluated and fed into the project at an early degree of technology maturity. Furthermore, an expert-supported set of sociopolitical, economic, and ecological evaluation criteria and a meaningful set of indicators were derived in order to analyse and evaluate the multicriterial optimisation approaches and avoidance strategies and in a next step measures for implementation and diffusion.

WP 8 Management and communication

Contact persons
Dr.-Ing. Eva Bitter, EnviroChemie GmbH, F&E, In den Leppsteinswiesen 9, 64380 Rossdorf, e-mail: eva.bitter@envirochemie.com Dr. Anja Steglich, inter 3 GmbH - Institute for Resource Management, 10585 Berlin, e-mail: steglich@inter3.de

Project partner
TU-AT, TU-AW, HSRM, BS-Partikel

Short description
In order to disseminate and implement the project results, industrial companies were actively involved and dialogue is carried out with experts from relevant industry associations (e.g. PlasticsEurope e.V., IK Industrievereinigung Plastikverpackungen e.V., GKV Gesamtverband Plastikverarbeitende Industrie e.V.). The collaboration was commissioned to a) develop the results into a consensual overall perspective, b) prepare these into action-oriented and implementable guidelines and c) make them available via established channels and multipliers, e.g. the Responsible Care Initiative of the chemical industry.

Coordinator

Dr.-Ing. Eva Bitter
EnviroChemie GmbH
In den Leppsteinswiesen 9
64380 Rossdorf
Phone: +49 6154-6998-57
e-mail: eva.bitter@envirochemie.com

Website

http://www.emistop.de/page8.html

Partner Institutions

Technical University of Darmstadt, Institute IWAR, Department of Wastewater Engineering

Technical University of Darmstadt, Institute IWAR, Department of Wastewater Technology

RheinMain University, Institute for Environmental and Process Engineering / HSRM

inter 3 GmbH-Institute for Resource Management

BS-Partikel GmbH

Duration Period

January 2018

December 2020

Tags

Sewage

Methodology of analyses

Sewage treatment plant

Environmental accounting

Polyethylene terephthalate (PET)

Polymer analysis

Polypropylene (PP)

Polystyrene (PS)

Polyvinyl chloride (PVC)

Project sheet

15_Projektblatt_EmiStop_ENG_2018.pdf

Koordinator label

Coordinator

REPLAWA

KALEH — Tue, 19 Dec 2017 16:24:02 +0000

REPLAWA KALEH Tue, 12/19/2017 - 17:24

Reduction of the Input of Plastics via Wastewater into the Aquatic Environment

The REPLAWA project covered questions of water resource protection in connection with wastewater treatment. The project investigated and quantitatively assessed entry points into water bodies through treatment plants, storm water drainage, and combined sewer overflows as well as swales at treatment facilities and in sewage sludge. It tested and rated various practical methods of reducing and eliminating plastic emissions into waterways during wastewater treatment. Based on the results of these investigations and of assessments regarding international regulatory approaches in this field, the project derived strategies for reducing plastic release from wastewater treatment into waterways. Furthermore the sensitization of policymakers as well as plant operators to this problem is also relevant.

The pollutant in focus of this project was microplastic, which poses the greatest challenges to reach the project’s goals.

The results are of immediate environmental and economic use, as they spread technical expertise regarding the choice and integration of technologies suitable for retaining plastic in wastewater treatment. Relevant political and administrative decision makers benefit from the inventory the project inherently provides and from suggested strategy developments of urban water management.

Main areas of work

Further development and testing of suitable sampling, preparation and analysis methods for plastic particles in wastewater and sewage sludge
Inventory and classification of discharges into water bodies via combined sewer overflows, precipitation water, sewage plant effluents and diffuse sources
Inventory and balancing on large-scale wastewater treatment plants
Evaluation and further development of various technical solutions for the separation of plastics during wastewater treatment by means of comparative tests
Social science analysis and classification of wastewater-related regulatory proposals and measures worldwide
Recommendations for action on strategy development in the field of urban water management and the associated regulation of plastic input

Arbeitspakete

Work packages

WP 1 Sampling and analysis methods

Contact person
Prof. Dr.-Ing. Matthias Barjenbruch, Technical University of Berlin, Faculty VI - Planning Building Environment, Institute of Civil Engineering, Chair of Urban Water Management, Gustav-Meyer-Allee 25, 13355 Berlin, e-mail: matthias.barjenbruch@tu-berlin.de

Project partner
Emscher Wassertechnik, TU Braunschweig ISWW, Lippeverband

Short description
Definition and application of sampling and analysis methods, comprising i.a. the following tasks:

Compilation of requirements for sampling, sample preparation and analysis for microplastic
Selection of suitable analytical techniques for the joint research project
Establishment of technical and personnel capacities at the Berlin location
Definition of sampling and preparation methods for wastewater and sewage sludge
Further development, validation of sampling and analysis
Development of the methodical procedure for microplastic doping in separation investigations

WP 2 Inventory of entry points for plastics in water bodies

Contact person
Prof. Dr.-Ing. Holger Scheer, Emscher Wassertechnik GmbH, Brunnenstr. 37, 45128 Essen, e-mail: scheer@ewlw.de

Project partner
TU Berlin FG Siwawi, TU Braunschweig ISWW, Lippeverband, Stadtentwässerung Braunschweig GmbH

Short description
Inventory and evaluation of the pathways microplastic takes into water, agriculture and groundwater, which includes the following tasks:

data collection, review and selection of appropriate river basin sections, groundwater bodies, and agricultural land
definition of a detailed measurement and sampling programme
representation and verification of discharges and boundary conditions
sampling and analyses
supplementary surveys and data evaluation with regard to wastewater input
analysis of measured data, quantitative assessment of entry points, evaluation

WP 3 Inventory and balancing on large-scale wastewater treatment plants

Contact person
Prof. Dr.-Ing. Matthias Barjenbruch, Technical University of Berlin, Faculty VI - Planning Building Environment, Institute of Civil Engineering, Chair of Urban Water Management, Gustav-Meyer- Allee 25, 13355 Berlin, e-mail:matthias.barjenbruch@tu-berlin.de

Project partner
Emscher Wassertechnik, TU Braunschweig ISWW, Lippeverband, Stadtentwässerung Braunschweig GmbH

Short description
Investigation, evaluation and optimisation approaches for microplastic retention in largescale wastewater treatment plants with the following individual tasks:

Compilation of requirements for wastewater treatment plants with conventional activated sludge process and process with further solids retention
Selection and coordination with large-scale plants
Detailed recording of plant characteristics and boundary conditions
Sampling and analyses
Evaluation of measured data, balancing of material flows, evaluation
Derivation of further requirements: technical and operational optimisation approaches for large-scale plants and for the semi-technical investigations (WP 4) with regard to the retention of microplastics

WP 4 Semi-technical investigations for the further development of technical solutions for the deposition of plastics

Contact person
Prof. Dr.-Ing. Norbert Dichtl, Technical University of Braunschweig, Institute of Sanitary and Environmental Engineering, Pockelsstraße 2a, 38106 Braunschweig, e-mail: n.dichtl@tu-braunschweig.de

Project partner
Emscher Wassertechnik GmbH, TU Berlin FG Siwawi, Mecana Umwelttechnik GmbH, Nordic Water GmbH, MARTIN Membrane Systems AG, Stadtentwässerung Braunschweig GmbH

Short description
Evaluation and optimisation of the retention performance of microplastics in wastewater treatment plants by investigations on a semitechnical scale for the (downstream) filtration of wastewater and for sewage sludge digestion with doped microplastics. The following steps were carried out for this purpose:

selection of plant technology for separation processes using membrane, cloth filter and sand filter
setting up the test and measurement programme
construction of semi-technical test facilities for comparative investigations at the Braunschweig site
execution of the experimental operation, sampling and analyses
technical and operational optimisation of the plants with regard to the retention of microplastics
final evaluation and assessment of measurement data and plant operation

WP 5 Social science analysis of regulatory projects and measures worldwide

Contact person
Univ.-Prof. Dr. phil. habil. Anja P. Jakobi, Technical University of Braunschweig, Institute of Social Sciences, Chair of International Relations, Bienroder Weg 97, 38106 Braunschweig, e-mail: a.jakobi@tu-braunschweig.de

Project partner
Emscher Wassertechnik GmbH

Short description
Compilation of international regulatory concepts on microplastics in wastewater, with analysis of stakeholder interests, evaluation of political measures with regard to problem solving and compilation of political options for action in the field of urban water management.

Interviews with national, European and global actors
Networking with the other key actors of the research focus
Analysis of stakeholder interests (state, private) and their effects on regulation (descriptive and causal)
Causal analysis of regulatory results (qualitative and – depending on data quality – statistical)
Evaluation of policy measures with regard to problem-solving

WP 6 Recommendations for action on strategy development in the field of urban water management

Contact person
Prof. Dr.-Ing. Holger Scheer, Emscher Wassertechnik GmbH, Brunnenstraße 37, 45128 Essen, e-mail: scheer@ewlw.de

Project partner
TU Berlin FG Siwawi, TU Braunschweig ISWW, TU Braunschweig IB-ISW, Mecana Umwelttechnik GmbH, Nordic Water GmbH, MARTIN Membrane Systems AG, Lippeverband, Stadtentwässerung Braunschweig GmbH

Short description
Elaboration of recommendations for strategy development regarding the evaluation and reduction of the input of microplastics via wastewater into the natural environment, including the classification of regulatory approaches:

Recommendations for action on water discharges, rainwater treatment, and agricultural utilisation
Description of technical possibilities for elimination and reduction in wastewater treatment plants, upgrading of wastewater treatment plants
Upscaling of the results for different wastewater treatment plant size classes
To show how regulatory approaches and changes can be initiated or influenced
Development of further recommendations for action and information on the overall strategy development, including the results of the social science analyses

WP 7 Coordination of the joint research project

Contact person
Prof. Dr.-Ing. Holger Scheer, Emscher Wassertechnik GmbH, Brunnenstraße 37, 45128 Essen, e-mail: scheer@ewlw.de

Short description
Technical and organisational coordination of the joint research project regarding result determination and support in disseminating findings. Among other things, the following steps were carried out for this purpose:

Technical coordination of cross-cutting topics
Coordination with the accompanying project
Organisation of project meetings and workshops overarching the research network
Creation and implementation of a communication concept
Support for the dissemination of results
Tracking of time and work planning

Coordinator

Prof. Dr.-Ing. Holger Scheer
Emscher Wassertechnik GmbH
Brunnenstraße 37
45128 Essen
Phone: +49 201 3610-120
e-mail: scheer@ewlw.de

Website

www.replawa.de

Partner Institutions

Technical University of Berlin, Department of Urban Water Management / TU Berlin FG Siwawi

Technical University of Braunschweig, Institute of Sanitary and Environmental Engineering / ISWW

Technical University of Braunschweig, Institute for Social Sciences / IB-ISW

Nordic Water GmbH

MARTIN Membrane Systems AG

Lippeverband

Subcontractor

Mecana Umwelttechnik GmbH

Stadtentwässerung Braunschweig GmbH

Duration Period

January 2018

December 2021

Project sheet

14_Projektblatt_REPLAWA_ENG_2018.pdf

Koordinator label

Coordinator

revolPET

KALEH — Tue, 19 Dec 2017 15:53:14 +0000

revolPET KALEH Tue, 12/19/2017 - 16:53

Development of a Recycling Technology for PET Waste Plastics from Multilayer Material and Other Waste Composites

As part of the revolPET project, a solvolytic recycling process for waste PET plastics (Polyethylene Terephthalate) from multilayer and other mixed materials was elaborated and experimentally tested. Inactive patents for solvolysis of single-variety PET waste formed the basis for this research: those solvolytic processes were be enhanced into a continuous waste treatment concept that can recycle PET waste. This enabled the recycling of the PET materials present in the mixed waste and the separation of differing amounts of interfering substances, with the latter being redirected to other uses. The recycling process generates the basic components of PET: monoethylene glycol and terephthalic acid. The flexibility of the process enables sorting of waste from very inhomogenous materials sources such as marine and technical PET wastes. The new recycling process was tested and evaluated in a pilot plant. The data from this testing is included into continuous economic and ecological assessments of the procedure and its integration into the value chain.

Main areas of work

Development of the technical basis for continuous solvolysis
Operation of the pilot plant for experimental development and technological validation of the solvolysis process
Development of a mass and energy balances of the continuous processing methods (for pure and mixed PET waste)
Development of a model-based tool for the analysis and assessment of environmental impacts
Determination of market requirements with regard to recycling routes and required specifications for new streams of recyclable materials
Opening up new sources of supply for PET waste composites from post-consumer collections and technical applications

Arbeitspakete

Work packages

WP 1 Basic research, process and apparatus design

Contact person
Prof. Dr.-Ing. Stephan Scholl, Technical University of Braunschweig, Institute for Chemical and Thermal Process Engineering, Langer Kamp 7, 38106 Braunschweig, e-mail: s.scholl@tu-braunschweig.de

Project partner
Fraunhofer ICT, Reclay Materials GmbH, RITTEC Umwelttechnik GmbH, SCHILLER Apparatebau GmbH, VTU Engineering Deutschland GmbH

Short description
The technical fundamentals for continuous solvolysis of initially pure PET to multilayer and mixed PET were developed. The data served as the basis for the planning, design, construction and commissioning of a modular pilot plant, which enabled investigations of different apparatus.

WP 2 Pilot studies

Contact person
Carsten Eichert, RITTEC Umwelttechnik GmbH, Feldstraße 29, 21335 Lüneburg, e-mail: eichert@rittec.eu

Project partner
Fraunhofer ICT, TU Braunschweig ICTV, Reclay Materials GmbH, SCHILLER Apparatebau GmbH, VTU Engineering Deutschland GmbH

Short description
The central experimental elaboration and technological validation of the solvolysis process took place through the operation of the pilot plant. The process engineering solutions found in the basic investigations in WP 1 were implemented here. First, PET of a higher purity was processed. For this purpose, the continuous operation is represented. The final goal was the continuous operation of the pilot plant for mixed PET waste streams.

WP 3 Accounting and multi-criteria rating

Contact person
Prof. Dr.-Ing. Christoph Herrmann, Technical University of Braunschweig, Institute of Machine Tools and Production Technology, Langer Kamp 19B, 38106 Braunschweig, e-mail: c.herrmann@tu-braunschweig.de

Project partner
TU Braunschweig ICTV, RITTEC Umwelttechnik GmbH, Reclay Materials GmbH

Short description
The aim was to establish a closed and consistent mass and energy balance of the continuous processing method (for single-variety and mixed PET waste) parallel to the experimental development of the recycling process. This was first created for the continuous operation of the pilot plant, compared with the operating data and then scaled to potential market scenarios. Based on the formulated requirements and the data from the pilot plant, a model-based tool for the analysis and evaluation of environmental impacts was developed.

WP 4 Market analysis and technology implementation

Contact person
Carsten Eichert, RITTEC Umwelttechnik GmbH, Feldstraße 29, 21335 Lüneburg, e-mail: eichert@rittec.eu

Project partner
Fraunhofer ICT, TU Braunschweig ICTV, TU Braunschweig IWF, Reclay Materials GmbH, SCHILLER Apparatebau GmbH, VTU Engineering Deutschland GmbH

Short description
The market requirements with regard to recycling routes and required specifications for new streams of recyclable materials was determined. By means of potential analysis, the proportion of recyclable technical waste in machine tools and industrial plants in Germany was also estimated. Based on this, new sources of supply for PET waste composites from post-consumer collections and technical applications was developed. New potential partners for the implementation of the newly developed solvolysis process in the value chain and the new disposal channels was identified.

Coordinator

Carsten Eichert
RITTEC Umwelttechnik GmbH
Feldstraße 29
21335 Lüneburg
Phone: +49 4131 - 408 55 44
e-mail: eichert@rittec.eu

Website

https://revolpet.eu/?lang=en

Partner Institutions

Technical University of Braunschweig

Institute for Chemical and Thermal Process Engineering / ICTV

Institute of Machine Tools and Production Technology / IWF

Fraunhofer Institute for Chemical Technology, Department of Environmental Engineering / ICT

Reclay Materials GmbH

SCHILLER Apparatebau GmbH

VTU Engineering Deutschland GmbH

Duration Period

October 2017

March 2021

Tags

Fluorescence marker-based sorting technology

Industry

Industrial emissions

Consumption

Life Cycle Assessment

Environmental accounting

Optimization process

Plastic littering

Polyester

Polyethylene terephthalate (PET)

Resource conservation

Secondary raw materials

Solvolysis

Sorting

Material flow managment

Project sheet

11_Projektblatt_solvoPET_ENG_2018.pdf

Koordinator label

Coordinator

PLASTRAT

KALEH — Tue, 19 Dec 2017 14:34:18 +0000

PLASTRAT KALEH Tue, 12/19/2017 - 15:34

Strategies for Reducing the Entry of Urban Plastics into Limnic Systems

The common element of all investigations in PLASTRAT was the development of solution strategies for sustainable limitation of the spread of plastic residues in the aquatic environment on technical, environmental, scientific and social-ecological levels. The objective consisted of developing a multi-criteria evaluation approach for the environmental compatibility of different types of plastics. In addition, a quality label for practical application was designed. The focus lay on the analysis and evaluation of the degradation stages of different types of plastics as well as leaching, adsorption and desorption in different wastewater treatment stages, the effects of different plastic species (in different degradation stages) and their additives on aquatic organisms in limnic systems, as well as a risk characterisation of the human toxicological effect of microplastics on consumers of drinking water. Furthermore, the emphasis is put on the quantification and technical reduction potential (e.g. use of membrane technology) of plastic emissions in urban water management, including sewage sludge/fermentation residue treatment, taking into account suitable sampling, treatment and analysis methods. Besides, studies were carried out on the social relevance, i.e. how plastics are handled in German households, what demands the consumer places on plastics, what possibilities exist for the use of substitutes and the resulting effects on commerce, logistics and consumers.

Main areas of work

Determination and evaluation of microplastic pathways in limnic systems
Investigation and evaluation of technical measures for microplastic elimination
Sampling strategies for further processing and analysis of microplastics
Sample preparation for analysis of microplastics
Identification and quantification of microplastics in all samples
Automation of particle recognition, measurement and identification using databases
Adsorption/desorption of pollutants on microplastics
Degradation and leaching of polymers of different groups
Ecotoxicological studies of released substances from microplastics
Human toxicological investigations of released substances from microplastics
Risk analysis of drinking water
Investigation of societal relevance
Development of a multi-criteria evaluation system
Development of a quality label through an accompanying stakeholder dialogue

Arbeitspakete

Work packages

WP K Coordination und Communikation

Contact persons
Prof. Dr.-Ing. Christian Schaum, apl. Prof. Dr.-Ing. Steffen Krause, Bundeswehr University Munich, Institute of Hydroscience, Chair of Sanitary Engineering and Waste Management, Werner-Heisenberg-Weg 39, 85577 Neubiberg, e-mail: swa@unibw.de

Short description
In addition to the tasks of general scientific project management, internal communication between the network partners and external communication (increasing public awareness of the project) were also covered. This includes, among other things, uniform guidelines for public relations work by individual network partners and within the overall consortium, organisation of meetings, monitoring of work progress, document management and coordination of the associated partners.

WP 1 Microplastics in the urban water cycle

Project partner
UF, IWW, BfG, a2i, TUDa, inge, IPF, IOW

Short description
Basic data and definitions for PLASTRAT were specified in consultation with all project partners. This relates to the definition of the upper and lower limit of the particle size for microplastic particles to be examined, the selection of specific plastic species from the categories conventional plastics, recyclates, and biobased or biodegradable polymers. Further work included the selection or determination of suitable sites for investigations of WP 2 and 3, taking into account the products considered in WP 5. In addition, a stakeholder analysis was carried out along with a more detailed evaluation for developing the quality label.

WP 2 Degradation und material dynamics

Contact person
Prof. Dr. Thomas Ternes, German Federal Institute of Hydrology (BfG), Am Mainzer Tor 1, 56068 Koblenz, e-mail: ternes@bafg.de

Project partner
UniBwM, TUDa

Short description
The environmental behaviour of biobased, synthetic and recycled plastics was analysed in WP 2. Original materials were examined, as well as artificially-aged materials. The release of pollutants (oligomers, additives and their transformation products) was analysed depending on the type of polymer and the degree of degradation. Furthermore, differences in the adsorption/desorption of environmental chemicals were investigated for different types of polymers and the role of wastewater treatment plants regarding the pollutant load of microplastics (enrichment or depletion).

WP 3 Entry points and elimination

Project partner
UniBwM, a2i, inge, IPF, IOW

Short description
Different entry points of microplastics into limnic systems were assessed, focusing on the analysis and evaluation of the waste water management system including measures for microplastic retention (e.g. membrane technology) that already exist or have been modified or developed in the course of the project. Core areas comprised rain and mixed water discharge, the assessment and evaluation of the entire wastewater treatment plant system, and an analysis of sewage sludge, digestate and compost as possible microplastic sinks. Emphasis was also put on the development and selection of suitable processing and analytical methods.

WP 4 Impact and hazard analysis

Contact persons
Prof. Dr. Jörg Oehlmann, Dr. Ulrike Schulte-Oehlmann, Goethe University Frankfurt, Max-von-Laue-Straße 13, 60438 Frankfurt, e-mail: oehlmann@bio.uni-frankfurt.de

Project partner
IWW

Short description
Comparative analyses were conducted for biobased, synthetic and recycled plastics in different degradation stages as well as for their additives and substances adsorbed/desorbed regarding their effects applying various human and ecotoxicological methods. The results were used to derive threshold values and environmental quality objectives. These contributed to the hazard analysis and evaluation of the different plastic species with regard to their relevance and environmental compatibility for the limnic environment. The experimental investigations were supplemented by a risk analysis of the drinking water system.

WP 5 Societal relevance

Contact person
Dr. Immanuel Stieß, ISOE - Institute for Social-Ecological Research, Hamburger Allee 4, 60486 Frankfurt, e-mail: stiess@isoe.de

Short description
The social perception, use and disposal of plastic based products were analysed as well as the possibilities, conditions and obstacles for more sustainable consumption and disposal practices. The focus lay on applications in the non-food sector (hygiene articles, clothing and dog excrement bags) as their incorrect or informal disposal can lead to the emission of microplastics into limnic systems that may have negative effects on organisms and aquatic ecosystems. Analysing of the perception of environmental risks and product-specific use and disposal practices was carried out through qualitative exploration and standardised surveys.

WP 6 Evaluation system/quality label

Contact person
Kristina Wencki, IWW Rheinisch-Westfälisches Institute for Water Research gGmbH, Moritzstraße 26, 45476 Mülheim an der Ruhr, e-mail: k.wencki@iww-online.de

Project partner
ISOE, UniBwM, UF, BfG

Short description
Within the project, a multi-criteria evaluation system for plastics regarding to their environmental compatibility with limnic systems was developed. At the same time, the identification of the evaluation criteria was used to initiate the critical discourse about the quality label that demonstrates this environmental compatibility. To this end, a stakeholder dialogue was conducted. In addition to synthesizing the outcomes of the preceding work packages, this made a significant contribution to transfer the newly acquired findings into research and business practice.

Coordinator

Prof. Dr.-Ing. Christian Schaum and apl. Prof. Dr.-Ing. Steffen Krause
Bundeswehr University Munich Institute of Hydroscience /
UniBwM Chair of Sanitary Engineering and Waste Management
Werner-Heisenberg-Weg 39
85577 Neubiberg
Phone: + 49 89-6004-2061 bzw. -2698 /-3849
e-mail: swa@unibw.de

Website

http://www.plastrat.de/project/

Partner Institutions

Goethe University Frankfurt / UF

Institute for Social-Ecological Research/ISOE

IWW Rheinisch-Westfälisches Institute for Water Research gGmbH / IWW

German Federal Institute of Hydrology (BfG) / BfG

aquadrat ingenieure GmbH / a2i

Technical University of Darmstadt, Institute IWAR /TUDa

inge GmbH /inge

Leibniz Institute of Polymer Research Dresden / IPF

Leibniz Institute for Baltic Sea Research Warnemünde / IOW