Validation of Sample Preparation Methods for Microplastic Analysis in Wastewater Matrices

Validation of Sample Preparation Methods for Microplastic Analysis in Wastewater Matrices

Reproducibility and Standardization

There is a growing interest in monitoring microplastics in the environment, corresponding to increased public concerns regarding their potential adverse effects on ecosystems. Monitoring microplastics in the environment is difficult due to the complex matrices that can prevent reliable analysis if samples are not properly prepared first. Unfortunately, sample preparation methods are not yet standardized, and the various efforts to validate them overlook key aspects. The goal of this study was to develop a sample preparation method for wastewater samples, which removes natural organic matter without altering the properties of microplastics. Three protocols, based on KOH, H2O2, and Fenton reactions, were chosen out of ten protocols after a literature review and pre-experiments. In order to investigate the effects of these reagents on seven polymers (PS, PE, PET, PP, PA, PVC, and PLA), this study employed µFTIR, laser diffraction-based particle size analysis, as well as TD-Pyr-GC/MS. Furthermore, the study discussed issues and inconsistencies with the Fenton reactions reported in the literature in previous validation efforts. The findings of this study suggest that both H2O2 and Fenton reactions are most effective in terms of organic matter removal from microplastic samples while not affecting the tested polymers, whereas KOH dissolved most PLA and PET particles

 

Magazine
Water 12(9)
DOI
https://doi.org/10.3390/w12092445
Year
2020
Citation

Al-Azzawi et al. 2020 - Validation of Sample Preparation Methods for Microplastic Analysis in Wastewater Matrices—Reproducibility and Standardization; Water 2020, 12(9), 2445; https://doi.org/10.3390/w12092445 (OpenAccess)

Joint project
( top of page )( zum Seitenanfang )